Brooks HI FI projectors In

Short For "in the circuit," in other words "active."

Balanced
1) Having a pleasing amount of low frequencies compared to mid-range frequencies and high frequencies. 2) Having a pleasing mixture of the various instrument levels in an audio recording. 3) Having a fairly equal level in each of the stereo channels. 4) A method of interconnecting electronic gear using three-conductor cables.

Brooks RM 909 Group
1) A number of channels or faders that can be controlled by one Master VCA slide.
2) A shortening of the term Recording Group (a buss or the signal present on a buss).

Gain Structure
The way in which the gain varies in the stages or sections of an audio system.

Brooks Hi Fi speakers Headroom
1) The level difference (in dB) between normal operating level and clipping level in an amplifier or audio device.
2) A similar level difference between normal tape operating level and the level where the distortion would be 3%.
3) The difference, in decibels, between the peak and RMS levels in program material.

Charge
The electrical energy of electrons. The energy is in the form of a force that is considered negative and repels other like forces (other electrons) and attracts opposite (positive) forces.

Fader
A control to control the gain of a channel on the console, thereby determining the level of the signal in that channel.

Diaphragm
A thin flexible membrane or cone that vibrates in response to electrical signals to produce sound waves. Distortion is usually referred to in terms of total harmonic distortion (THD) which is the percentage of unwanted harmonics of the drive signal present with the wanted signal. Generally used to mean any unwanted change introduced by the device under question.

Brooks Hi Fi reviews Amp

1) An abbreviation of the term Amplifier (A device which increases the level of an electrical signal.
2) An abbreviation of Ampere (the unit of current).
3) An abbreviation of amplitude (the height of a waveform above or below the zero line).

Current
The amount of electron charge passing a point in a conductor per unit of time.

Brooks RM 909 reviews Error Message
A prompt on a computer screen telling the operator that an error has occurred.

AES
An abbreviation of Audio Engineering Society.

Brooks RM 909 Basic Session
The First session in recording an audio production to record the Basic Tracks.

Channels
These are divided into two separate categories. Input channels are those channels coming into the soundboard such as microphones and direct lines. Output channels are those leaving the board such as monitor and main outputs.

Cycles Per Second
A unit used in the measure of frequency, equivalent to Hertz. Cycles Per Second is an outdated term replaced by Hertz in 1948.

Amplitude
The strength of a vibrating wave; in sound, the loudness of the sound.