The area from 3 feet away from the sound source up to the critical distance.
Format
1) The number of tracks, their width, spacing and order for tape recording.
2) To prepare a digital storage medium so that it will accept and store digital information bits.
Brooks RM 909 Bi
A prefix meaning two.
Equipment Rack
A cabinet with rails (or free standing rails) that have holes to accept screws at standard spaces and used to house outboard gear.
Brooks HI FI projectors Keyboard Controller
A device that has the standard music keys of piano but puts out MIDI signals
Golden Section
A ratio of height to width to length of a room to achieve "good acoustics" and first recommended by the ancient Greeks. The ratio is approximately the width 1.6 times the height and the length 2.6 times the height
Comb Filter
1) The frequency response achieved by mixing a direct signal with a delayed signal of equal strength especially at short delays.
2) Loosely used to also describe effects that can be achieved with comb filtering as part of the processing.
Keynote Number
A number assigned to each key of a synthesizer or controller keyboard that is transmitted in the MIDI signal.
Tuesday, September 19, 2023
Saturday, September 16, 2023
Brooks HI FI projectors Lead Sheet
A written chart showing the melody, lyrics and chords of a tune with full musical notation.
Chorusing
1) A term meaning the same thing as Chorus (Definition 3 or 4).
2) In some delay effects devices, a term used to mean the term Depth (the amount of change in the controlled signal by the control signal).
Brooks Hi Fi reviews Electric Instrument
Any musical instrument that puts out an electrical signal rather than an acoustic sound.
LFO
Low-Frequency Oscillator (an oscillator that puts out an AC signal between .1 Hz and 10Hz used for a control signal).
Brooks RM 909 Audio
Most often referring to electrical signals resulting from the sound pressure wave being converted into electrical energy.
Engineer
1) A technician in charge of a recording session; Also called Recording Engineer.
2) A person with an engineering degree.
3) A person with sufficient experience in the field to be equivalent to the education one would receive earning an engineering degree.
Joystick
1) A quad pan pot which distributes what percentage of on signal is sent to each of 4 outputs.
2) A control that is separately controlling two functions at one time.
Full Step
A change in pitch that occurs when moving up or down two piano keys
Chorusing
1) A term meaning the same thing as Chorus (Definition 3 or 4).
2) In some delay effects devices, a term used to mean the term Depth (the amount of change in the controlled signal by the control signal).
Brooks Hi Fi reviews Electric Instrument
Any musical instrument that puts out an electrical signal rather than an acoustic sound.
LFO
Low-Frequency Oscillator (an oscillator that puts out an AC signal between .1 Hz and 10Hz used for a control signal).
Brooks RM 909 Audio
Most often referring to electrical signals resulting from the sound pressure wave being converted into electrical energy.
Engineer
1) A technician in charge of a recording session; Also called Recording Engineer.
2) A person with an engineering degree.
3) A person with sufficient experience in the field to be equivalent to the education one would receive earning an engineering degree.
Joystick
1) A quad pan pot which distributes what percentage of on signal is sent to each of 4 outputs.
2) A control that is separately controlling two functions at one time.
Full Step
A change in pitch that occurs when moving up or down two piano keys
Wednesday, September 13, 2023
Brooks Hi Fi reviews Auxiliary Input or Return
A route back into the sound desk for a signal sent to a piece of outboard equipment via an auxiliary send.
Atom
The smallest particle which makes up a specific substance. It's composed of a center around which electrons revolve.
Brooks RM 909 reviews Line In (Input, return)
Where a signal enters the board or component.
High-Pass Filter
A device that rejects signals that are below a certain frequency (called the cut-off frequency) and passes signals with frequencies that are higher.
Brooks RM 909 Early Reflections
The first echoes in a room, caused by the sound from the sound source reflecting off one surface before reaching the listener.
Crossover Frequency
1) The frequency that is the outer limit of one of the bands of a crossover.
2) In the Lexicon 480L delay/reverberation effects unit, the frequency at which the bass frequency reverb time is in effect rather than the mid frequency reverb time.
Full
A quality of the sound of having all frequencies present, especially the low frequencies.
Coax
Two-conductor cable consisting of one conductor surrounded by a shield.
Atom
The smallest particle which makes up a specific substance. It's composed of a center around which electrons revolve.
Brooks RM 909 reviews Line In (Input, return)
Where a signal enters the board or component.
High-Pass Filter
A device that rejects signals that are below a certain frequency (called the cut-off frequency) and passes signals with frequencies that are higher.
Brooks RM 909 Early Reflections
The first echoes in a room, caused by the sound from the sound source reflecting off one surface before reaching the listener.
Crossover Frequency
1) The frequency that is the outer limit of one of the bands of a crossover.
2) In the Lexicon 480L delay/reverberation effects unit, the frequency at which the bass frequency reverb time is in effect rather than the mid frequency reverb time.
Full
A quality of the sound of having all frequencies present, especially the low frequencies.
Coax
Two-conductor cable consisting of one conductor surrounded by a shield.
Sunday, September 10, 2023
Brooks Hi Fi reviews Flange
An effect caused by an approximately even mix of a modulated (varying) short delay with the direct signal.
Group Faders
The VCA faders of individual channels that are all controlled by a Group Master Fader (a slide control used to send out a control voltage to several VCA faders in individual channels).
Brooks Hi Fi speakers Infinite Baffle
A baffle so large that the sounds coming from one side do not reach the other side.
Equalizer (Parametric, Graphic)
This is used to filter out and adjust specific frequencies in the PA. This is the part of the PA where you have the most control over the band's overall sound. It is also the number one weapon against feedback.
Brooks RM 909 reviews Frequency Range
The range of frequencies over which an electronic device is useful or over which a sound source will put out substantial energy.
Analog (Analogue)
Representative, continuous changes that relate to another quantity that has a continuous change.
Keying Input (Key Input)
An input on a dynamics processing device to control the device by an external audio signal.
AC
1) Abbreviation for alternating current.
2) An abbreviation of the term Alternating Current (electric current which flows back and forth in a circuit; all studio signals running through audio lines are AC).
Group Faders
The VCA faders of individual channels that are all controlled by a Group Master Fader (a slide control used to send out a control voltage to several VCA faders in individual channels).
Brooks Hi Fi speakers Infinite Baffle
A baffle so large that the sounds coming from one side do not reach the other side.
Equalizer (Parametric, Graphic)
This is used to filter out and adjust specific frequencies in the PA. This is the part of the PA where you have the most control over the band's overall sound. It is also the number one weapon against feedback.
Brooks RM 909 reviews Frequency Range
The range of frequencies over which an electronic device is useful or over which a sound source will put out substantial energy.
Analog (Analogue)
Representative, continuous changes that relate to another quantity that has a continuous change.
Keying Input (Key Input)
An input on a dynamics processing device to control the device by an external audio signal.
AC
1) Abbreviation for alternating current.
2) An abbreviation of the term Alternating Current (electric current which flows back and forth in a circuit; all studio signals running through audio lines are AC).
Thursday, September 7, 2023
Brooks HI FI projectors In Port
A jack on a MIDI device or computer that will accept an incoming data signal.
Axis
A line around which a device operates. Example: In a microphone, this would be an imaginary line coming out from the front of the microphone in the direction of motion of the diaphragm.
Brooks RM 909 Format
1) The number of tracks, their width, spacing and order for tape recording.
2) To prepare a digital storage medium so that it will accept and store digital information bits.
Compact Disc CD
A small optical disk with digital audio recorded on it.
Brooks Hi Fi reviews Echo Send Control
A control to send the signal from the input module to the echo chamber or effects device via the echo buss.
Bi-Amplification
1) A way of optimizing the efficiency of a speaker system by separately amplifying the High Frequency (HF) and Low Frequency (LF) portions of the sound signal and sending them down two pairs of cables to the speaker. Multipin Speakon connectors have been developed to do this.
2)The process of having of having low-frequency speakers and high-frequency speakers driven by separate amplifiers.
Chip
1) A slang term with the same meaning as the term IC (a miniature circuit of many components that is in small, sealed housing with prongs to connect it into equipment).
2) The thread cut away from the master lacquer to make the groove, while disc recording.
Headroom
1) The level difference (in dB) between normal operating level and clipping level in an amplifier or audio device.
2) A similar level difference between normal tape operating level and the level where the distortion would be 3%.
3) The difference, in decibels, between the peak and RMS levels in program material.
Axis
A line around which a device operates. Example: In a microphone, this would be an imaginary line coming out from the front of the microphone in the direction of motion of the diaphragm.
Brooks RM 909 Format
1) The number of tracks, their width, spacing and order for tape recording.
2) To prepare a digital storage medium so that it will accept and store digital information bits.
Compact Disc CD
A small optical disk with digital audio recorded on it.
Brooks Hi Fi reviews Echo Send Control
A control to send the signal from the input module to the echo chamber or effects device via the echo buss.
Bi-Amplification
1) A way of optimizing the efficiency of a speaker system by separately amplifying the High Frequency (HF) and Low Frequency (LF) portions of the sound signal and sending them down two pairs of cables to the speaker. Multipin Speakon connectors have been developed to do this.
2)The process of having of having low-frequency speakers and high-frequency speakers driven by separate amplifiers.
Chip
1) A slang term with the same meaning as the term IC (a miniature circuit of many components that is in small, sealed housing with prongs to connect it into equipment).
2) The thread cut away from the master lacquer to make the groove, while disc recording.
Headroom
1) The level difference (in dB) between normal operating level and clipping level in an amplifier or audio device.
2) A similar level difference between normal tape operating level and the level where the distortion would be 3%.
3) The difference, in decibels, between the peak and RMS levels in program material.
Monday, September 4, 2023
Brooks RM 909 reviews Frets
Vertical metal wires which sit vertically on the guitar neck.
Edit
A switch that does different things depending on the operational mode that the machine is in:
1) If a computer-controlled transport is in "Stop," pushing the "Edit" switch deactivates the computer-controlled tension system and allows the reels to be moved by hand to find the exact spot desired on the tape.
2) If the machine is in "Play", the "Edit" switch makes the take-up reel cease taking up the tape and it falls to the floor.
3) If the machine is in a fast-wind mode, the tape lifters are defeated so the tape is in contact with the reproduce head and the engineer can hear where the selections begin and end.
Brooks RM 909 Bi-Amplification
1) A way of optimizing the efficiency of a speaker system by separately amplifying the High Frequency (HF) and Low Frequency (LF) portions of the sound signal and sending them down two pairs of cables to the speaker. Multipin Speakon connectors have been developed to do this.
2)The process of having of having low-frequency speakers and high-frequency speakers driven by separate amplifiers.
Golden Section
A ratio of height to width to length of a room to achieve "good acoustics" and first recommended by the ancient Greeks. The ratio is approximately the width 1.6 times the height and the length 2.6 times the height
Brooks Hi Fi speakers Dolby
Trade name for a series of noise reduction systems that have become standard on many tape playback machines. Many film soundtracks are produced using this process. Different varieties are found from Dolby B on most personal cassette players, to Dolby SR and Digital, the current state of the art for cinema.
Arc
The visible sparks generated by an electrical discharge.
Cable, 1/4 inch
An unbalanced cable most often used for instruments and patch cords. Commonly referred to as "guitar cords".
Infinite Repeat
A function on some delay lines that establish enough feedback so that the repeat echo will last forever, but not so much as to cause a howling sound.
Edit
A switch that does different things depending on the operational mode that the machine is in:
1) If a computer-controlled transport is in "Stop," pushing the "Edit" switch deactivates the computer-controlled tension system and allows the reels to be moved by hand to find the exact spot desired on the tape.
2) If the machine is in "Play", the "Edit" switch makes the take-up reel cease taking up the tape and it falls to the floor.
3) If the machine is in a fast-wind mode, the tape lifters are defeated so the tape is in contact with the reproduce head and the engineer can hear where the selections begin and end.
Brooks RM 909 Bi-Amplification
1) A way of optimizing the efficiency of a speaker system by separately amplifying the High Frequency (HF) and Low Frequency (LF) portions of the sound signal and sending them down two pairs of cables to the speaker. Multipin Speakon connectors have been developed to do this.
2)The process of having of having low-frequency speakers and high-frequency speakers driven by separate amplifiers.
Golden Section
A ratio of height to width to length of a room to achieve "good acoustics" and first recommended by the ancient Greeks. The ratio is approximately the width 1.6 times the height and the length 2.6 times the height
Brooks Hi Fi speakers Dolby
Trade name for a series of noise reduction systems that have become standard on many tape playback machines. Many film soundtracks are produced using this process. Different varieties are found from Dolby B on most personal cassette players, to Dolby SR and Digital, the current state of the art for cinema.
Arc
The visible sparks generated by an electrical discharge.
Cable, 1/4 inch
An unbalanced cable most often used for instruments and patch cords. Commonly referred to as "guitar cords".
Infinite Repeat
A function on some delay lines that establish enough feedback so that the repeat echo will last forever, but not so much as to cause a howling sound.
Friday, September 1, 2023
Brooks Hi Fi speakers Foot Pedal
1) An effects device where the amount of the effect can be controlled by a musician with his foot.
2) The beater mechanism of a foot drum that is activated by the drummer's foot to play the drum.
3) Any device, like a volume control, that can be operated by the foot.
Fundamental
The tuned frequency and (almost always) the lowest frequency that is present in the sounding of a pitch by a musical instrument.
Brooks RM 909 Kick (Kick Drum)
Another term for Bass Drum.
Line In (Input, return)
Where a signal enters the board or component.
Brooks Hi Fi reviews Capacitance
That property of a capacitor which determines how much charge can be stored in it for a given potential difference between its terminals, measured in farads, by the ratio of the charge stored to the potential difference.
Hz (Hertz)
1) An abbreviation for the term Hertz (the unit of frequency).
2) Unit of frequency equivalent to the number of cycles per second.
Isolation Booth/ Isolation Room
A room that prevents loud sounds from other instruments from leaking in: an isolation booth is usually a smaller room that could be used for only one musician.
Compressor
A signal processing device that does not allow as much fluctuation in the level of the signal above a certain adjustable or fixed level.
2) The beater mechanism of a foot drum that is activated by the drummer's foot to play the drum.
3) Any device, like a volume control, that can be operated by the foot.
Fundamental
The tuned frequency and (almost always) the lowest frequency that is present in the sounding of a pitch by a musical instrument.
Brooks RM 909 Kick (Kick Drum)
Another term for Bass Drum.
Line In (Input, return)
Where a signal enters the board or component.
Brooks Hi Fi reviews Capacitance
That property of a capacitor which determines how much charge can be stored in it for a given potential difference between its terminals, measured in farads, by the ratio of the charge stored to the potential difference.
Hz (Hertz)
1) An abbreviation for the term Hertz (the unit of frequency).
2) Unit of frequency equivalent to the number of cycles per second.
Isolation Booth/ Isolation Room
A room that prevents loud sounds from other instruments from leaking in: an isolation booth is usually a smaller room that could be used for only one musician.
Compressor
A signal processing device that does not allow as much fluctuation in the level of the signal above a certain adjustable or fixed level.
Subscribe to:
Posts (Atom)