The large toms to the right of the drummer.
Electricity
Electrical current (the amount of electron charge passing a point in a conductor per unit of time) or voltage (the force pushing electrons to obtain electrical current).
Brooks GS 15 Inverse Square Law
Simply stated, the fact that in an un-obstructed area (like an open field) the sound pressure level will drop to half-pressure (-6 dB) every time the distance to the sound source is doubled.
Binary
A numbering system based on two. In binary there are two symbols used ("l" and "0").
Brooks GT 44 Controller
1) In MIDI, a device that generates a MIDI signal to control synthesizers, sound modules or sample playback units.
2) A remote control unit for a multitrack tape machine which controls transport functions as well as monitor selection switching functions and record ready/safe status of each track.
3) Any device generating a control voltage or signal fed to another device's control input.
Intermodulation Distortion
Distortion caused by one signal beating with another signal and producing frequencies that are both the sum and the difference of the original frequencies.
Frequency Response
How sensitive an electronic device (mic, amplifier, speaker, etc.) is to various frequencies; often communicated with a graph.
Grouping
1) Controlling the gain of several individual channels with a Group Fader.
2) The mixing together of several individual audio signals to send a mixed signal out of the console to record a track on a multitrack tape machine.
Subscribe to:
Post Comments (Atom)
Brooks Hi Fi speakers Charge
The electrical energy of electrons. The energy is in the form of a force that is considered negative and repels other like forces (other e...
-
A room designed with very hard, non-parallel surfaces and equipped with a speaker and microphone; dry signals from the console are fed to ...
-
The number of steady even pulses in music occurring in one minute and there fore defining the tempo of the song. Direct box Used in ...
-
An additional output from a sound desk that can be used for foldback or monitoring without tying up the main outputs. Each input channel w...
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.