A unit that will add effects to a direct guitar signal, including a simulated instrument amplifier sound and (often) delay and reverb effects.
Head Amp
British name for Preamplifier (A low-noise amplifier designed to take a low-level signal, such as the output of a tape head, and bring it up to normal line level).
Brooks KM 77 Buss (Bus)
A wire carrying signals to some place, usually fed from several sources.
Cord (Speaker, Mic, Instrument)
Used to connect a sound system together. Each type of cord is made for a specific purpose and should not be used in place of another type of cord, not even if they look alike. Also see "cable"
Brooks XT 20 In-Line Console
A console with modules that have controls for all console sections in one long strip.
Images
The squaring of the waveform that happens in the conversion of digital audio bits into analog signals.
Jack Bay
A series of jacks which have connections for most of the inputs and outputs of the equipment in the control room.
Balance Control
A control on a stereo amplifier that when moved clockwise will make the right channel louder (and the left channel softer) and will do the reverse when moved counter-clockwise.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.