Where a signal leaves the board or component.
Compact Disc, Read Only Memory CDROM
A Compact Disc used to store digital data, such as large programs, that can be read by a computer.
Brooks Cinema Series Boom Stand
A microphone stand equipped with a telescoping support arm to hold the microphone.
Isolation
A containing of the sound wave in a certain area so that it will not leak into other areas and/or unintended mics.
Brooks XB 22 Compact Disc CD
A small optical disk with digital audio recorded on it.
Input
1) The jack or physical location of where a device receives a signal.
2) The signal being received by a device.
3) The action of receiving a signal by a device.
Final Mix
The two track stereo master tape which was mixed from the multitrack master.
Equalization
1) The process of adjusting the tonal quality of a sound. A graphic equalizer provides adjustment for a wide range of frequency bands, and is normally inserted in the signal path after the mixing desk, before the amplifier. See Feedback.
2) Any time the amplitude of audio signals at specific set of frequencies are increased or decreased more than the signals at other audio frequencies.
Subscribe to:
Post Comments (Atom)
Brooks HI FI projectors Compact Disc CD
A small optical disk with digital audio recorded on it. Cycle 1) An alternation of a waveform which begins at a point, passes throug...
-
The extreme range of a signal. Usually measured from the average to the extreme. Frets Vertical metal wires which sit vertically on ...
-
The height of a waveform above or below the zero line. Cycle 1) An alternation of a waveform which begins at a point, passes through...
-
Outboard sound equipment that can momentarily stores a signal being sent to part of a P.A. system so that delayed reinforced sound reaches...
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.