Brooks Cinema Projectors Frequency

Practically speaking, high frequency means high pitch and low frequency means low pitch.

First Generation
A descriptive term meaning original (as opposed to a copy).

Brooks QS-70 Jack
1) Anywhere you plug something in.
2) Segmented audio connector. Mono Jacks have two connections �" tip and sleeve, and are unbalanced. Stereo jacks have three connections �" tip, ring and sleeve. B-type jacks (also known as Bantam jacks) were originally designed for use in telephone exchanges and provide a high quality (and expensive) connection in jackfields. A-type jacks are cheaper and more common, but more fragile. A type jacks are available in 2 sizes : quarter inch and eighth inch.
3) A connector mounted on the case of a device or on a panel.

Headstock
The area of the guitar at the end of the neck where the strings are tuned.

Brooks GT 44 In Port
A jack on a MIDI device or computer that will accept an incoming data signal.

Channel
1) In multitrack tape machines, this term means the same thing as the term Track (one audio recording made on a portion of the width of a multitrack tape).
2) A single path that an audio signal travels or can travel through a device from an input to an output.

Gain Reduction
The working of a limiter or compressor reducing gain during high-level passages.

Charge
The electrical energy of electrons. The energy is in the form of a force that is considered negative and repels other like forces (other electrons) and attracts opposite (positive) forces.