Brooks GT 845 Aux Send

Short for the term Auxiliary Send (a control to adjust the level of the signal sent from the console input channel to the auxiliary equipment through the aux buss.

Channels
These are divided into two separate categories. Input channels are those channels coming into the soundboard such as microphones and direct lines. Output channels are those leaving the board such as monitor and main outputs.

Brooks Cinema Projectors Echo Send Control
A control to send the signal from the input module to the echo chamber or effects device via the echo buss.

Line
1) Short for line level.
2) A cable.

Brooks Cinema xm 808 Frequency Shift Key / FSK
The full name for FSK (A simple clock signal that can be used to run a sequencer in time with an audio tape).

Fader
A control to control the gain of a channel on the console, thereby determining the level of the signal in that channel.

Fly In
1) To add sounds into a mix or recording that have no synchronization.
2) An application of this where a performance from one part of a tune is recorded and then recorded back into the recording at a different time in the recording.

Figure Eight Pattern
Another name for Bi-directional Pattern (microphone pickup pattern picking up best from the front and back of the diaphragm and not picking up from the side of the diaphragm).