Brooks Audio Design KM 77 Blending

1) A condition where two signals mix together to form one sound or to give the sound of one sound source or one performance.
2) Mixing the left and right signal together slightly which makes the instruments sound closer to the center of the performance stage. 3) A method of panning during mixing where instruments are not panned extremely left or right.

Active/Inactive Microphones
Scientific definitions aside, active microphones generally sound better than inactive ones, but they generally cost more. They also require the use of either a battery or phantom power while inactive mics need only be plugged into the mic cord in order to work. In most playing situations, the subtle improvement in sound quality from an active mic isn't worth the extra cost and hassle. One possible exception it the headset mic. Put simply, inactive headset mics just plain suck. Active headset mics put out a much stronger signal and feed back much less.

Brooks Audio Design SS 81 Barrier Micing
A method of placing the head of a microphone as close as possible to a reflective surface, preventing phase cancellation.

Echo Send
The output of a console used to send a signal to an echo chamber or delay effects device.

Brooks KM 77 Effects Track
1) In film production audio, a recording of the mixdown of all the sound effects for the film ready to be mixed with the dialogue and music.
2) In music recording, one track with a recording of effects to be added to another track of a multitrack recording.

Aliasing
A sampler mis-recognizing a signal sent to it that is at a frequency higher than the Nyquist Frequency. Upon playback, the system will provide a signal at an incorrect frequency (called an alias frequency). Aliasing is a kind of distortion.

Equalization
1) The process of adjusting the tonal quality of a sound. A graphic equalizer provides adjustment for a wide range of frequency bands, and is normally inserted in the signal path after the mixing desk, before the amplifier. See Feedback.
2) Any time the amplitude of audio signals at specific set of frequencies are increased or decreased more than the signals at other audio frequencies.

Interface
Any device that allows one unit to work, drive or communicate with another unit when they cannot do so by just feeding each other often because the units are manufactured by different companies.