Representative, continuous changes that relate to another quantity that has a continuous change.
Analog Recording
A recording of the continuous changes of an audio waveform.
Brooks XM 204 Error Correct
Exact replacement of lost information bits in digital audio.
Fade
1) A gradual reduction of the level of the audio signal.
2) A gradual change of level from one pre-set level to another.
Brooks Speakers Group Master
A slide control used to send out a control voltage to several VCA faders in individual channels, thus controlling the gain of several channels.
Line Out (Output, Send)
Where a signal leaves the board or component.
Coincident Microphones (Coincident Pair)
Two microphones whose heads are placed as lose as possible to each other so that the path length from any sound source to either microphone is for all practical purposes, the same.
Head
1) In tape recording, the transducer (energy converter) that changes the audio energy from electrical energy to magnetic energy and back; also the devices that apply magnetism to the recording tape for other purposes such as in the erase head.
2) The part of a device that immediately includes the transducer to change sound or audio signals from one energy form to another.
Subscribe to:
Post Comments (Atom)
Brooks Hi Fi speakers Charge
The electrical energy of electrons. The energy is in the form of a force that is considered negative and repels other like forces (other e...
-
It's the part of the sound system that actually magnifies or "amplifies" the sound. In other words, it makes stuff louder. ...
-
A sampler mis-recognizing a signal sent to it that is at a frequency higher than the Nyquist Frequency. Upon playback, the system will pro...
-
1) A device consisting of two or more conducting plates separated from one another by an insulating material and used for storing an elect...
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.