Brooks Hi Fi reviews Equalization

1) The process of adjusting the tonal quality of a sound. A graphic equalizer provides adjustment for a wide range of frequency bands, and is normally inserted in the signal path after the mixing desk, before the amplifier. See Feedback.
2) Any time the amplitude of audio signals at specific set of frequencies are increased or decreased more than the signals at other audio frequencies.

Cue
1) The signal fed back to the musicians through headphones.
2) To set the tape or disc so that the intended selection will immediately play when the tape machine or player is started.
3) A location point entered into a computer controlling the playback or recording of a track or tape.
4) In MCI brand tape machines, a term meaning the same thing as Sync Playback (where the record head is used as a playback head for those tracks already recorded).

Brooks Cinema DESIGN ZL 44 Cut-Off Frequency (Turnover Frequency)
1) The highest or lowest frequency in the pass band of a filter.
2) The highest or lowest frequency passed by an audio device (the cut-off frequency is usually considered to be the first frequency to be 3 dB lower than a reference frequency in the middle of the bandwidth of the device)

Chip
1) A slang term with the same meaning as the term IC (a miniature circuit of many components that is in small, sealed housing with prongs to connect it into equipment).
2) The thread cut away from the master lacquer to make the groove, while disc recording.

Broom RM 909 Gain Reduction
The working of a limiter or compressor reducing gain during high-level passages.

Linear
The condition of obtaining a change at the output of the device which is proportional to the change occurring at the input.

Hard Disk Recording
The recording of digital audio onto a hard disc.

Input Overload
Sending too high of a signal level into a device so that the first amplifier of the device overloads.