Brooks Cinema GT 845 reviews Jam Sync

A generation of new SMPTE according to the input SMPTE signal

Inductance
The property of an electric circuit by which a varying current in it produces a varying magnetic field that introduces voltages in the same circuit or in a nearby circuit. It is measured in henrys.

Brooks VT-50 reviews Input Overload
Sending too high of a signal level into a device so that the first amplifier of the device overloads.

Electret Condenser
A condenser microphone that has a permanently polarized (charged) variable capacitor as its sound pressure level sensor.

Brooks GT 845 reviews Corner Frequency
Same as Cut-Off Frequency (the highest or lowest frequency in the pass band of a filter). (NOUN)

Frequency Shift Key / FSK
The full name for FSK (A simple clock signal that can be used to run a sequencer in time with an audio tape).

Balls
1) The depth and thickness of a sound, usually on the bottom end of the EQ (as in "needs more balls"). 2) The strength of the voice on the mic (as in "check it like you have some balls").

Feedback
1) The delayed signal sent back to the input of a delay line, used in repeat-echo effects.
2) The pickup of the signal out of a channel by its input or the howling sound that this produces.
3) In an amplifier, the phase reversed output signal sent back to its input, reducing gain but also distortion and noise.
4) This occurs when the sound coming out of the speakers goes back into the microphones, then back out the speakers, then back into the mics…and so on. This can build very quickly to a point where everyone in the room is holding their ears and screaming at you. It can also cause damage to the PA.