The electronic dohickey under the knobs that increases or reduces the strength of the signal running through it. When these get old and dirty, they can make popping noises or rumbles in your PA (As in "my pots are dirty").
Assign Tochoose to which place an output is going to be sent.
In-Line Console
A console with modules that have controls for all console sections in one long strip.
Brooks Hi Fi speakers Amplifier
Sound equipment that converts the low voltage, low current signal from a tape deck, mixer etc. into a higher current signal suitable for driving speakers. See Power Amplifier, Crossover.
Efficiency
The acoustic power delivered for a given electrical input. Often expressed as decibels/watt/meter (dB/w/m). ESL �" Abbreviation for electrostatic loudspeaker.
Brooks HI FI projectors Floppy Disk (Floppy Disc)
A round flat object (usually housed in a protective sleeve) coated with material that can be magnetized in a similar manner to tape.
Ambient Field
A term with the same meaning as the term Reverberant Field (the area away from the sound source where the reverberation is louder than the direct sound).
Cut-Off Frequency (Turnover Frequency)
1) The highest or lowest frequency in the pass band of a filter.
2) The highest or lowest frequency passed by an audio device (the cut-off frequency is usually considered to be the first frequency to be 3 dB lower than a reference frequency in the middle of the bandwidth of the device)
Gain Control
A device that changes the gain of an amplifier or circuit, often a knob that can be turned or a slide that can be moved up arid down.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.