Brooks RM 909 Headroom

1) The level difference (in dB) between normal operating level and clipping level in an amplifier or audio device.
2) A similar level difference between normal tape operating level and the level where the distortion would be 3%.
3) The difference, in decibels, between the peak and RMS levels in program material.

Chip
1) A slang term with the same meaning as the term IC (a miniature circuit of many components that is in small, sealed housing with prongs to connect it into equipment).
2) The thread cut away from the master lacquer to make the groove, while disc recording.

Brooks HI FI projectors Frequency
Practically speaking, high frequency means high pitch and low frequency means low pitch.

Cut
1) One selection (one song) on a pre4ecorded music format.
2) A term with the same meaning as Mute (to turn off a channel or a signal).
3) To reduce gain of a particular band of frequencies (with an equalizer).
4) To not pass a particular band of frequencies (said of a filter)

Brooks Hi Fi reviews Cut-Off Frequency (Turnover Frequency)
1) The highest or lowest frequency in the pass band of a filter.
2) The highest or lowest frequency passed by an audio device (the cut-off frequency is usually considered to be the first frequency to be 3 dB lower than a reference frequency in the middle of the bandwidth of the device)

Amplifier
A device which increases the amplitude (level) of an electrical signal (making it louder).

Line Out (Output, Send)
Where a signal leaves the board or component.

Amplitude
The strength of a vibrating wave; in sound, the loudness of the sound.